Serial Block Face-Scanning Electron Microscopy as a Burgeoning Technology.

Serial block face scanning electron microscopy (SBF-SEM), also referred to as serial block-face electron microscopy, is an advanced ultrastructural imaging technique that enables three-dimensional visualization that provides largerx- and y-axis ranges than other volumetric EM techniques. While SEM is first introduced in the 1930s, SBF-SEM is developed as a novel method to resolve the 3D architecture of neuronal networks across large volumes with nanometer resolution by Denk and Horstmann in 2004. Here, the authors provide an accessible overview of the advantages and challenges associated with SBF-SEM. Beyond this, the applications of SBF-SEM in biochemical domains as well as potential future clinical applications are briefly reviewed. Finally, the alternative forms of artificial intelligence-based segmentation which may contribute to devising a feasible workflow involving SBF-SEM, are also considered.

Electrochemical immunosensing of low-density lipoprotein based on sol-gel encapsulation

Abstract Lipoprotein monitoring is desirable in the management of medical conditions such as atherosclerotic cardiovascular disease and coronary artery disease, in which controlling the concentration of these chylomicrons is crucial. Current clinical methods are complex and present poor reproducibility between laboratories. For these reasons, recent guidelines discard the assessment of low-density lipoprotein cholesterol (LDL-C) as a routine analysis during lipid-lowering therapies. Concerning the importance of monitoring this parameter, the authors present an electrochemical immunosensor constructed from a simple and easy-to-reproduce platform that allows detecting and quantifying LDL nanoparticles directly from human serum samples. The performance of the biosensor was studied by scanning electron microscopy, cyclic voltammetry, and electrochemical impedance spectroscopy. The biosensing platform displays good stability and linearity between 30 mg dL-1 and 135 mg dL-1 with a detection limit of 20 mg dL-1. The proposed biosensor can be easily employed for monitoring LDL concentration in clinical treatments.

Development of microparticles and microparticulated tablets containing piperine

Abstract Piper nigrum (black pepper) is used in Indian traditional medicine and its main alkaloid, Piperine (PIP), presents antioxidant, antitumor and neuroprotective pharmacological properties. This substance is insoluble in aqueous media and can irritate the gastrointestinal tract. Aiming to avoid these inconvenient characteristics and enable PIP oral administration, this study suggested the PIP microencapsulation through the emulsion-solvent evaporation method and the preparation of microparticulated tablets by direct compression. An UV-spectroscopy method was validated to quantify PIP. Microparticles and microparticulated tablets were successfully obtained and the microparticles exhibited excellent flow. The scanning electron microscopy images showed that PIP microparticles were intact after compression. The in vitro release showed a controlled release of PIP from microparticles and PIP microparticles from tablets in comparison to PIP and PIP tablets. The release profiles of PIP microparticles and the microparticulated tablets were similar. Therefore, tablets containing PIP microparticles are promising multiparticulated dosage forms because a tablet allows microparticles administration and the intact ones promote a controlled release, decreasing its irritating potential on the mucosa.

PVP solid dispersions containing Poloxamer 407 or TPGS for the improvement of ursolic acid release

Abstract Solid dispersions (SDs) of ursolic acid (UA) were developed using polyvinylpyrrolidone K30 (PVP K30) in combination with non-ionic surfactants, such as D-α-tocopherol polyethylene glycol 1000 succinate (TPGS) or poloxamer 407 (P407) with the aim of enhancing solubility and in vitro release of the UA. SDs were investigated using a 24 full factorial design, subsequently the selected formulations were characterized for water solubility, X-ray diffractometry (XRD), differential scanning calorimetry (DSC), particle diameter, scanning electron microscopy, drug content, physical-chemical stability and in vitro release profile. SDs showed higher UA water-solubility than physical mixtures (PMs), which was attributed by transition of the drug from crystalline to amorphous or molecular state in the SDs, as indicated by XRD and DSC analyses. SD1 (with P407) and SD2 (with TPGS) were chosen for further investigation because they had higher drug load. SD1 proved to be more stable than SD2, revealing that P407 contributed to ensure the stability of the UA. Furthermore, SD1 and SD2 increased UA release by diffusion and swelling-controlled transport, following the Weibull model. Thus, solid dispersions obtained with PVP k-30 and P407 proved to be advantageous to enhance aqueous solubility and stability of UA.

Development of inclusion complex based on cyclodextrin and oxazolidine derivative

Abstract Oxazolidine derivatives (OxD) have been described as third-line antibiotics and antitumoral agents. The inclusion complexes based on cyclodextrin could improve the solubility and bioavailability of these compounds. A novel synthetic OxD was used, and its inclusion complexes were based on 2-hydroxy-beta-cyclodextrin (2-HPßCD). We conducted an in silico study to evaluate the interaction capacity between OxD and 2-HPßCD. Characterization studies were performed through scanning electron microscopy (SEM), Fourier-transformed infrared (FTIR), nuclear magnetic resonance spectroscopy (1H-NMR), X-ray diffraction (XRD), and thermal analyses. A kinetic study of the OxD was performed, including a cytotoxicity assay using peripheral blood mononuclear cells (PBMCs). The maximum increment of solubility was obtained at 70 mM OxD using 400 mM 2-HPßCD. SEM analyses and FTIR spectra indicated the formation of inclusion complexes. 1H-NMR presented chemical shifts that indicated 1:1 stoichiometry. Different thermal behaviors were obtained. The pharmacokinetic profile showed a short release time. Pure OxD and its inclusion complex did not exhibit cytotoxicity in PBMCs. In silico studies provided a foremost insight into the interactions between OxD and 2-HPßCD, including a higher solubility in water and an average releasing profile without toxicity in normal cells

Examining atherosclerotic lesions in three dimensions at the nanometer scale with cryo-FIB-SEM.

We employed in a correlative manner an unconventional combination of methods, comprising cathodoluminescence, cryo-scanning electron microscopy (SEM), and cryo-focused ion beam (FIB)-SEM, to examine the volumes of thousands of cubed micrometers from rabbit atherosclerotic tissues, maintained in close-to-native conditions, with a resolution of tens of nanometers. Data from three different intralesional regions, at the media-lesion interface, in the core, and toward the lumen, were analyzed following segmentation and volume or surface representation. The media-lesion interface region is rich in cells and lipid droplets, whereas the core region is markedly richer in crystals and has lower cell density. In the three regions, thin crystals appear to be associated with intracellular or extracellular lipid droplets and multilamellar bodies. Large crystals are independently positioned in the tissue, not associated with specific cellular components. This extensive evidence strongly supports the idea that the lipid droplet surfaces and the outer membranes of multilamellar bodies play a role in cholesterol crystal nucleation and growth and that crystal formation occurs, in part, inside cells. The correlative combination of methods that allowed the direct examination of cholesterol crystals and lipid deposits in the atherosclerotic lesions may be similarly used for high-resolution examination of other tissues containing pathological or physiological cholesterol deposits.

Evaluation of Zebrafish Toxicology and Biomedical Potential of Aeromonas hydrophila Mediated Copper Sulfide Nanoparticles.

The present study deals with extracellular synthesis and characterization of copper sulfide (CuS) nanoparticles using Aeromonas hydrophila, and the biological applications of the synthesized CuS like antibacterial, anti-inflammatory, and antioxidant activity were reported. Further, the toxicological effects of the CuS were evaluated using zebrafish as an animal model. The primary step of the synthesis was carried out by adding the precursor copper sulfates to the culture supernatant of Aeromonas hydrophila. The UV-visible spectrophotometer was used to characterize the synthesized nanoparticles, and the peak was obtained at 307 nm through the reduction process. Fourier transform infrared spectroscopy (FTIR) was involved to find out the functional groups (carboxylic acid, alcohols, alkanes, and nitro compounds) associated with copper sulfide nanoparticles (CuS-NPs). Atomic force microscopy (AFM) was used to characterize the CuS topographically, and a scanning electron microscope (SEM) revealed about 200 nm sized CuS nanoparticles with agglomerated structures. Overall, the characterized nanoparticles can be considered as a potential candidate with therapeutic proficiencies as antibacterial, antioxidant, and anti-inflammatory mediator/agents.

Immunofluorescence and High-Resolution Microscopy Reveal New Insights in Human Globozoospermia.

Globozoospermia is a rare and severe type of teratozoospermia characterized by the presence of round-headed, acrosomeless spermatozoa with cytoskeleton defects. Current data support a negative relationship between globozoospermia and intracytoplasmic sperm injection (ICSI) outcomes, revealing the need to perform exhaustive studies on this type of sperm disorder. The aim of this study was to evaluate different structural, functional and molecular sperm biomarkers in total globozoospermia with proper embryo development after ICSI. The combination of field-emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM) allowed us to identify and correlate eight morphological patterns with both types of microscopy. Additionally, results reported a high percentage of coiled forms, with cytoplasmic retentions around the head and midpiece. By fluorescent microscopy, we detected that most of the sperm showed tubulin in the terminal piece of the flagellum and less than 1% displayed tyrosine phosphorylation in the flagellum. Moreover, we did not detect chaperone Heat shock-related 70 kDa protein 2 (HSPA2) in 85% of the cells. Overall, these findings provide new insights into globozoospermia, which could have potential implications in improving sperm selection methods for assisted reproductive techniques.

The use of Dalmatian pyrethrum daisy and an excipient in the treatment of seborrheic dermatitis.

The active ingredients of the Pyretrin-D trichological cosmetic series, namely benzyl benzoate, Dalmatian pyrethrum daisy, Cistus incanus, tea tree oil and geranium oil, almond acid and arginine were tested in respect to the treatment of seborrheic dermatitis. The paper describes the application of Dalmatian pyrethrum daisy and the excipient. Methods and devices used to confirm the effectiveness of the tested formulations included the TrichoScope Polarizer Dino-Lite (MEDL4HM) and the scanning electron microscope (SEM).

The Influence of the Material Structure on the Mechanical Properties of Geopolymer Composites Reinforced with Short Fibers Obtained with Additive Technologies.

Additive manufacturing technologies have a lot of potential advantages for construction application, including increasing geometrical construction flexibility, reducing labor costs, and improving efficiency and safety, and they are in line with the sustainable development policy. However, the full exploitation of additive manufacturing technology for ceramic materials is currently limited. A promising solution in these ranges seems to be geopolymers reinforced by short fibers, but their application requires a better understanding of the behavior of this group of materials. The main objective of the article is to investigate the influence of the microstructure of the material on the mechanical properties of the two types of geopolymer composites (flax and carbon-reinforced) and to compare two methods of production of geopolymer composites (casting and 3D printing). As raw material for the matrix, fly ash from the Skawina coal power plant (located at: Skawina, Lesser Poland, Poland) was used. The provided research includes mechanical properties, microstructure investigations with the use of scanning electron microscope (SEM), confocal microscopy, and atomic force microscope (AFM), chemical and mineralogical (XRD-X-ray diffraction, and XRF-X-ray fluorescence), analysis of bonding in the materials (FT-IR), and nuclear magnetic resonance spectroscopy analysis (NMR). The best mechanical properties were reached for the sample made by simulating 3D printing process for the composite reinforced by flax fibers (48.7 MPa for the compressive strength and 9.4 MPa for flexural strength). The FT-IR, XRF and XRD results show similar composition of all investigated materials. NMR confirms the presence of SiO4 and AlO4 tetrahedrons in a three-dimensional structure that is crucial for geopolymer structure. The microscopy observations show a better coherence of the geopolymer made in additive technology to the reinforcement and equal fiber distribution for all investigated materials. The results show the samples made by the additive technology had comparable, or better, properties with those made by a traditional casting method.

Combined molecular and supramolecular structural insights into pasting behaviors of starches isolated from native and germinated waxy brown rice.

In order to provide a theoretical basis on how germination treatment modulated the pasting behaviors of starches from native and germinated waxy brown rice, impacts of germination on the molecular and supramolecular structures and pasting behaviors were evaluated. Multiple analytical methods such as thermodynamics and spectroscopy were applied in this work for investigating the changes in starch multiscale structure and pasting behaviors. The results show that germination treatment contributed to an obvious increase in α- and ß-amylase activities, which could degrade the starch chains and reduce the contents of double helices (50.9%-43.2%), short-range ordered degree (1.054-0.908), relative crystallinity (40.1%-30.5%), and lamellar ordering degree (dc, 6.09-5.46 nm) along with apparent erosion on starch granules. These structural amorphizations at the molecular and supramolecular levels could lead to the weakened entanglements and interactions among molecular chains, eventually reducing the characteristic viscosity (e.g., overall, peak, and final viscosity) of starch. This study may facilitate better development of germinated rice-based products.

Effect of Twinlight Laser on the Attachment of Human Gingival Fibroblasts to the Root Surface In Vitro.

BACKGROUND This study aimed to compare the effectiveness of subgingival scaling and root planing with the Twinlight laser, Er: YAG laser, and hand instrumentation on the removal of endotoxin and attachment of human gingival fibroblasts (HGFs) to cementum surfaces in vitro. MATERIAL AND METHODS Single-rooted teeth extracted for periodontal disease were collected and divided into 3 groups: group A, root planing with Gracey curet no. 5/6; group B, irradiation with Er: YAG laser; group C, irradiation with Er: YAG laser and Nd: YAG laser. Endotoxins were determined by the limulus amebocyte lysate test. Cell attachment and proliferation of HGFs on root specimens were evaluated by cell counting kit-8 assay. The root surface and cell morphology were observed by scanning electron microscope. RESULTS A flat root surface with scratches was found in group A, Group B had a homogeneous rough morphology without carbonization, and group C had a non-homogeneous rough morphology with ablation. The endotoxin concentration was highest in group A (P<0.05) and lowest in group C (P>0.05). HGFs cultured in group B showed significantly increased adhesion and proliferation compared with groups A and C (P<0.05). HGFs in group B were well attached, covered densely by pseudopodia. HGFs in group A were round with poor extension and short pseudopodia, while the cells in the group C were in narrow, triangular, or polygonal shapes. CONCLUSIONS Twinlight laser-assisted periodontal treatment effectively improved the biocompatibility of root surface and promoted the attachment and proliferation of fibroblasts by removing calculus and reducing the concentration of endotoxins.

Biofabrication of ZnO nanoparticles using Acacia arabica leaf extract and their antibiofilm and antioxidant potential against foodborne pathogens.

Emergence of multidrug resistant pathogens is increasing globally at an alarming rate with a need to discover novel and effective methods to cope infections due to these pathogens. Green nanoparticles have gained attention to be used as efficient therapeutic agents because of their safety and reliability. In the present study, we prepared zinc oxide nanoparticles (ZnO NPs) from aqueous leaf extract of Acacia arabica. The nanoparticles produced were characterized through UV-Visible spectroscopy, scanning electron microscopy, and X-ray diffraction. In vitro antibacterial susceptibility testing against foodborne pathogens was done by agar well diffusion, growth kinetics and broth microdilution assays. Effect of ZnO NPs on biofilm formation (both qualitatively and quantitatively) and exopolysaccharide (EPS) production was also determined. Antioxidant potential of green synthesized nanoparticles was detected by DPPH radical scavenging assay. The cytotoxicity studies of nanoparticles were also performed against HeLa cell lines. The results revealed that diameter of zones of inhibition against foodborne pathogens was found to be 16-30 nm, whereas the values of MIC and MBC ranged between 31.25-62.5 µg/ml. Growth kinetics revealed nanoparticles bactericidal potential after 3 hours incubation at 2 × MIC for E. coli while for S. aureus and S. enterica reached after 2 hours of incubation at 2 × MIC, 4 × MIC, and 8 × MIC. 32.5-71.0% inhibition was observed for biofilm formation. Almost 50.6-65.1% (wet weight) and 44.6-57.8% (dry weight) of EPS production was decreased after treatment with sub-inhibitory concentrations of nanoparticles. Radical scavenging potential of nanoparticles increased in a dose dependent manner and value ranged from 19.25 to 73.15%. Whereas cytotoxicity studies revealed non-toxic nature of nanoparticles at the concentrations tested. The present study suggests that green synthesized ZnO NPs can substitute chemical drugs against antibiotic resistant foodborne pathogens.

ESEM Methodology for the Study of Ice Samples at Environmentally Relevant Subzero Temperatures: "Subzero ESEM".

Frozen aqueous solutions are an important subject of study in numerous scientific branches including the pharmaceutical and food industry, atmospheric chemistry, biology, and medicine. Here, we present an advanced environmental scanning electron microscope methodology for research of ice samples at environmentally relevant subzero temperatures, thus under conditions in which it is extremely challenging to maintain the thermodynamic equilibrium of the specimen. The methodology opens possibilities to observe intact ice samples at close to natural conditions. Based on the results of ANSYS software simulations of the surface temperature of a frozen sample, and knowledge of the partial pressure of water vapor in the gas mixture near the sample, we monitored static ice samples over several minutes. We also discuss possible artifacts that can arise from unwanted surface ice formation on, or ice sublimation from, the sample, as a consequence of shifting conditions away from thermodynamic equilibrium in the specimen chamber. To demonstrate the applicability of the methodology, we characterized how the true morphology of ice spheres containing salt changed upon aging and the morphology of ice spheres containing bovine serum albumin. After combining static observations with the dynamic process of ice sublimation from the sample, we can attain images with nanometer resolution.

Incorporation of Fibrin, Platelets, and Red Blood Cells into a Coronary Thrombus in Time and Space.

We describe the internal structure, spatial organization and dynamic formation of coronary artery thrombi from ST-segment elevation myocardial infarction patients. Scanning electron microscopy (SEM) revealed significant differences among four groups of patients (<2 hours; 2-6 hours; 6-12 hours, and >12 hours) related to the time of ischemia. Coronary artery thrombi from patients presenting less than 2 hours after the infarction were almost entirely composed of platelets, with small amounts of fibrin and red blood cells. In contrast, thrombi from late presenters (>12 hours) consisted of mainly platelets at the distal end, where clotting was initiated, with almost no platelets at the proximal end, while the red blood cell content went from low at the initiating end to more than 90% at the proximal end. Furthermore, fibrin was present mainly on the outside of the thrombi and older thrombi contained thicker fibers. The red blood cells in late thrombi were compressed to a close-packed, tessellated array of polyhedral structures, called polyhedrocytes. Moreover, there was redistribution from the originally homogeneous composition to fibrin and platelets to the outside, with polyhedrocytes on the interior. The presence of polyhedrocytes and the redistribution of components are signs of in vivo clot contraction (or retraction). These results suggest why later thrombi are resistant to fibrinolytic agents and other treatment modalities, since the close-packed polyhedrocytes form a nearly impermeable seal. Furthermore, it is of particular clinical significance that these findings suggest specific disparate therapies that will be most effective at different stages of thrombus development.

Research Techniques Made Simple: Volume Scanning Electron Microscopy.

Volume scanning electron microscopy (VSEM) involves the serial sectioning and imaging of a sample using scanning electron microscopy (SEM), followed by segmentation and three-dimensional (3D) reconstruction using computer software packages to allow visualization of 3D structures. VSEM can reveal qualitative and quantitative properties of organelles and cells within tissues at nanoscale. The ability to visualize spatial relationships of structures of interest within and across cells in 3D space in particular sets VSEM apart from conventional SEM and transmission electron microscopy. Here, we provide an overview of VSEM platforms and image processing, highlighting characteristics that will aid selection of a method to address specific research questions in dermatological research.

Study on inhibitory activity and mechanism of chitosan oligosaccharides on Aspergillus Flavus and Aspergillus Fumigatus.

Chitosan oligosaccharides (COS) are a derivative of low molecular weight chitosan and are potent natural antimicrobial agents. The antimicrobial activity of COS against Aspergillus flavus and Aspergillus fumigatus was evaluated by minimum inhibitory concentration (MIC) and inhibition of mycelial growth. The MICs of COS against these two fungi were 31.2 and 15.6 mg/mL, respectively. COS treatment rendered fungal mycelia wrinkled and deformed with a fractured appearance. COS also increased cellular permeability leading to a significant leakage of cellular components indicating membrane damage. This compound also dose-dependently reduced chitin production and enhanced chitinase activity while enhancing the accumulation of reactive oxygen species (ROS). These characteristics suggested that COS has inhibitory effects against food spoilage fungi and acts on the cell wall and membrane and alters cellular metabolism. COS shows promise for food industry applications since it is non-toxic to higher organisms.

Fabrication and characterization of 3-dimensional electrospun poly(vinyl alcohol)/keratin/chitosan nanofibrous scaffold.

Layer-by-layer three-dimensional nanofibrous scaffolds (3DENS) were produced using the electrospinning technique. Interest in using biopolymers and application of electrospinning fabrication techniques to construct nanofibers for biomedical application has led to the development of scaffolds composed of PVA, keratin, and chitosan. To date, PVA/keratin blended nanofibers and PVA/chitosan blended nanofibers have been fabricated and studied for biomedical applications. Electrospun scaffolds comprised of keratin and chitosan have not yet been reported in published literature, thus a novel nanofibrous PVA/keratin/chitosan scaffold was fabricated by electrospinning. The resulting 3DENS were characterized using fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), differential scanning colorimetry (DSC), and thermogravimetric analysis (TGA). Physiochemical properties of the polymer solutions such as viscosity (rheology) and conductivity were also investigated. The 3DENS possess a relatively uniform fibrous structure, suitable porosity, swelling properties, and degradation which are affected by the mass ratio of keratin, and chitosan to PVA. These results demonstrate that PVA/keratin/chitosan 3DENS have the potential for biomedical applications.

Polydopamine treatment of chitosan nanofibers for the conception of osteoinductive scaffolds for bone reconstruction.

We report the influence of treatment time of electrospun chitosan nanofibers (CHT NFs) in dopamine hydrochloride bath (2 mg.mL-1 in 10 mM Tris buffer, pH 8.5) on the extent of the polydopamine (pDA) coating on NFs surface. The reaction was characterized by FTIR and SEM analysis and the cytocompatibility of the scaffolds toward MT3C3-E1 cells was assessed. Biomimetic deposition of hydroxyapatite (HA) in 1.5xSBF batch was investigated by SEM-EDS and XRD. Samples treated in dopamine bath during 2 h promoted the structural stability of NFs in PBS, provided optimal cytocompatibility and induced the in vitro biomineralization from 6 days in 1.5xSBF. The XRD and SEM-EDS investigations confirmed formation of spherical-shaped particles composed of apatitic phase. Finally, this study shows that these NFs-pDA scaffolds prepared in the optimal experimental conditions defined here are promising candidates for application as osteoinductive scaffolds for bone regeneration applied to orthopedic and dental applications.

Improved water dispersion and bioavailability of coenzyme Q10 by bacterial cellulose nanofibers.

The purpose of this study was to investigate the potential of bacterial cellulose nanofiber suspension (BCNs) as stabilizer in anti-solvent precipitation and its effect on improving bioavailability of coenzyme Q10. Bacterial cellulose (BC) was hydrolyzed by sulfuric acid followed by the oxidation with hydrogen peroxide to prepare BCNs. The suspension of BCNs-loaded CoQ10 (CoQ10-BCNs) were prepared by antisolvent precipitation. The zeta potential of CoQ10-BCNs was about -36.01 mV. The properties of CoQ10, BCNs and CoQ10-BCNs were studied by scanning electron microscopy, transmission electron microscope, Fourier-transform infrared spectroscopy, X-ray diffraction, differential scanning calorimetry and thermo gravimetric analysis. The crystallinity of CoQ10 decreased in CoQ10-BCNs compared with the raw CoQ10, and CoQ10-BCNs have good physicochemical stability. In oral bioavailability studies, the area under curve (AUC) of CoQ10-BCNs was about 3.62 times higher than the raw CoQ10 in rats.